Maori tribal flatbow finished design

Hi,

Today I finished my selfbow from a maple stave. I made a Maori inspired design on the limbs with a black marker. The design is based on the Maori fern or koru, the national symbol used in many tribal tattoos. As a graphic artist I'm inspired by the Mauri Kirituhi style and I create tatoo designs and custom tattoos. You can find my tattoos and graphics on my website storm3d.com.
This bow is more of an arts and crafts project that I really enjoy when not drawing tatoo designs.

Once the designs were drawn on the bow, there was a really heavy contrast between the black marker and the white of the maple wood. To lower the contrast I decided to stain the wood with some brown shoeshine/polish. Finally I added 5 layers of clear varnish or lacquer and polished it for a smooth finish.

Here's a video of the final bow:

At my local bow I shot the bow for the first time and it was quite powerful, around 30 lbs at 28 inches. The draw starts really smooth, but at the end it has a sudden increase of drawweight. It feels a bit like a horsebow.
The handle has no arrow rest, so it's a bit tricky to position the arrow. I might add it later with a leather wrap around the handle section.

If you have any question on how to make a flatbow, selfbow or other projects I have been working on, just send me a message, or leave your comments below!

How to create the handle grip of a flatbow

Hi,

Today I wanted to finish the handle section of my selfbow. This one piece bow is made from a maple tree, cut in 4 sections and dried in my dryer/hotbox for a few weeks.

But I ran into a slight problem, the handle section was too thin for a comfortable grip, so I had to come up with a new plan. From an other laminated bow project (unfortunately broken...:( ) I kept some wooden strips, that were already glued together. It's a 1,5 inch block of meranti and a thin strip of oak in the center.
It seemed quite easy to glue it onto the existing bow, but I don't have a beltsander, so it took me a lot of work to flatten out the surface manually.
After half an hour of sanding it was finally done and I glued on the wood. Here you see a picture of the handle with the fades already cut off:

Then I used my rasp to smoothen it for a comfortable grip. I have quite a rough rasp, so there were a lot of cuts and bumps in the wood that needed some sanding.

After an hour of intensive work the final grip looks like this:

It's a nice contrast between the light color of the bow and the brown layers. I'm going to create a Maori inspired tattoo design on the limbs with a black marker. If you want to see some pictures, please check back soon or subscribe to my blog.

Any questions or tips? Just let me know.

Kind regards, Mark Storm

Final maple selfbow design, finishing the bow.

Hi,

Yesterday I posted some images of the maple tree staves and how I started on making a flatbow/selfbow. The rough shape of the bow is ready, now it is time to tiller the limbs by using my tillering tree.
It's made of a simple 2 by 4 inch beam with markings every inch. The top of the tillering stick holds the bow in a horizontal position.

Before you start to tiller on the stick, you should floortiller the bow, so you can see if the limbs are bending. If the limbs are too strong, you should remove some wood on each limb and tiller it again:

Here's a video on how to tiller your bow. This is part 4 of a series, you can watch all episodes on youtube:

After a few hours of tillering the limbs were bending pretty evenly, so I sanded the bow with different increasingly finer sandpaper.

Finally I wanted to put some color to the almost white bow and decided to use brown shoeshine. A couple of coatings were rubbed in and it was finished with 4 layers of clear lacquer.
I wrapped the handle with a piece of brown leather and the top and bottom of the handle with nylon string.

The bowstring is made of two red strands twisted together. The bow has a drawweight of 30 LBS at 28 inches. Here are some pictures of the final bow:

I'm working on a new bow at the moment, so maybe I can show you some more pictures soon.

Kind regards, Mark