4 nov. 2011

How to make tradtional arrows for selfbows

Hi,

After I finished a few flatbows from maple and hazel it's time for a new challenge, making some tradtional arrows . First I needed some wooden shafts, straight and approx. 30 inches long. My brother is a pigeon fancier and he uses these shafts to divide the pigeonhouse into sections for breeding.
I got a few nice and straight pieces and cut it to the exact length:

straight wooden arrow shafts 

There were also a few nice pigeon feathers that looked promising, so I took them as well. On my way home I realised that there is a poulterer in our town, so I went to his hangar. When I asked for some large feathers he got a box full of goose feathers, but they were a bit battered, so I could only use a few. Then he went to another room and came back with a complete swan wing! 
When asked how much for it, he said I could take it for free if I showed him the result of the arrow build. Thats a nice deal!


complete swan wing for arrow feathers

The wing was in a beautiful shape and there were 20 to 30 feathers perfect for arrow making. First I cut some arrows and split them in two halves. Then I used a sharp hobby knife and cut them in the final shape:


Before glueing the feathers to the wooden shafts I neede some kind of fletching jig like this:


I googled around and found some tutorials on how to build your own fletching jig with basic materials. First I made a 3d model in Google Sketchup to get the correct sizes of each piece.
The jig consists of two pieces of wood with a groove to hold the arrow horizontally. There's a groove on both inner sides, so you can slide in two pieces of plywood which holds the feather.



3d model of the arrow fletching jig
the plywood holds the feather and slides down on the shaft

It took me an hour to make this jig from some scrap pieces of wood. The lines you see on the jig are there to align the feathers at an angle of 120 degrees, so they are distributed evenly around the shaft.

the pencil lines show the correct angles of the feathers

the first arrow being fletched

After a few minutes the first few feathers were glued on the shaft with superglue:


I used some black thread to decorate the arrow in a medieval style:

fletched arrow with thread in a medieval style


diy medieval english arrow 

My neighbour is going to make some arrowheads, so I will show you the finished arrows soon.

Any questions? Just let me know

Kind regards, Mark
info@storm3d.com






2 nov. 2011

how to make a leather arm guard for shooting a bow

Hi,

The last few days I have been quite busy with all kind of designs for my tattoo website and also some hobby art projects. I wanted to create a leather armguard, to match the handle wrap on my first maple flatbow. There were a few large pieces of leather left. First I made a did some measurements on my arm and created a full size template for the armguard. Here you see the high quality template, you can use it for cutting your own guard as well. I also added a finger tab outline, so you have a complete set for your bow:


 You can click the image and download the high quality picture. If you print it, make sure the line is 10 cm, then the arm guard and fingertab will be at the right size.

Simply trace the shape on leather and cut it with a knife or scissors. I punched some holes in the sides of the guard with this piece of equipment:


Then you can press some metal rings in the holes for a smooth finish. A piece of paracord is used to strap it around the arm. You can use a simple knot, or get the element/button from a raincoat that straps your jacket, not sure how you name it...

The final piece has some stitching done on the back of the leather and I added another strip on top for some extra strength.


If you want the template in an Adobe Illustrator .ai file, just send me a message and I will forward the file, so you can adjust it to your own wishes.

Kind regards, Mark
info@storm3d.com